Sound Problems - Getac P470 User Manual

 If an error message appears on the screen, consult the software
program's documentation for further information.
If you are sure the operation has stop, reset the computer. (See

"Resetting the Computer" later in this chapter.)

Sound Problems

No sound is produced.
Make sure that the volume control is not set too low.

Make sure that the device driver is correctly installed.

Make sure that the computer is not in Sleep/Standby mode.

If using an external speaker, make sure that the speaker is properly

connected.
Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In

most cases, a high setting can cause the audio electronics to distort the
sound.
The sound system does not record.
Adjust the playback or recording sound levels.

The external microphone or audio device does not work.
Make sure that the microphone is connected to the proper connector

on the computer.
Make sure that your computer is equipped with the driver needed.

 Click the speaker symbol on the taskbar and check the Windows
volume control.
Check the volume control of your computer.

Troubleshooting 8-13