Assigning Names And Scan Rates (Two-Tier); Figure 17. Default Masterconsole Ii Channel Ids And Names - Raritan MCC4 User Manual

Assigning Names and Scan Rates (Two-Tier)

When you specify non-computer devices (MasterConsole units) con-
nected to base MasterConsole II channels, these devices are automati-
cally assigned default names in the base MasterConsole II Selection
Menu. In addition, since computers can be connected to each channel
of a second-tier MasterConsole, a page is automatically created for
each second-tier MasterConsole in the Selection Menu, listing Channel
IDs with default names for each channel. These names may be
changed using the Edit Names and Scan Rate Menu. See Figure 12b
and Figure 12c.
The following are the MasterConsole II default Channel ID and Names
for connected devices in a two-tier configuration.
To change Names and/or Channel-Specific Scan Rates:
1. Activate On-Screen User Interface.
2. Press <F3> to access the Edit Names and Scan Rate Menu.
See Figure 18 and Figure 19.
Connected Devices
computer
MasterConsole II
MasterConsole MCPn
* where aa= Channel # of the base MCCn.
Computers Connected To
MasterConsole II
where aa= Channel # of the base MCCn;
and bb= Channel # of the second-tier MasterConsole II
MasterConsole P Model
where aa= Channel # of the base MCCn,and b= Bank #
and cc= Channel # of the second-tier MCPn

Figure 17. Default MasterConsole II Channel IDs and Names

Base MasterConsole II
Channel ID
aa
aa
aa
Second Tier
Channel ID
aa.bb
aa.Bb-cc
21
Default Name
PC00aa*
/MCCaa*
/MCPaa*
Default Name
PCaabb
PCaaBbcc