Table of Contents
Advertisement
Configuring the Base MasterConsole II
(Two-Tier)
The Configuration Menu is used to specify your base MasterConsole II
configuration and to set/change parameters for operation.
See Figure 14
1.
Activate On-Screen User Interface by pressing the hot-key
(<Scroll-Lock> by default) twice rapidly.
2.
Press <F4> to access the Configuration Menu.
· The Connected field displays the Channel ID and Name of the
currently selected computer.
· The Model field displays the model number of this
MasterConsole unit (MCCn).
3.
Use the <Tab> (forward)/<Shift-Tab> (backward) keys to select
the desired field and make your change as follows:
To change Name (default is the unit's model number): Move to
·
Name and type a name up to five characters. This field is used-
for your identification purposes only.
The Device field specifies the type of device computer or
·
Connected: 01 PC0001
Model: MCC8 Name: MCC8
Device: . . . . . . .
Scan: Off Set: 15 Seconds
Skip: On
ID Display: 20 Seconds
Hot Key: Scroll Lock
Display Position: Menu ID
Green Mode: Off 15 Minutes
Previous Channel Key: CapsLck
F1 F2 F3 F4 F5 F6 F7 Esc
Figure 14. Configuration Menu (Two-Tier)
Configuration Menu
Mode: Global
19
Advertisement
Table of Contents
