Figure 15. Device Types; Figure 16. Device Field - Raritan MCC4 User Manual

20
MasterConsole connected to each channel of the base
MasterConsole II unit. <Tab> to the Device field. You must
specify the device for each channel .See Figure 15.
The Device field consists of a sequence of characters equal to
the channel capacity of the base unit. The leftmost character
corresponds to the unit's channel 1, while the rightmost charac-
ter corresponds to the highest channel number.
.
For non-computers, define the Device as follows:
a
b
c
d
x
y
z
D e v i c e : y . . . . c . .
For example, in Figure 16, the y . . . . c . . Device field indicates the fol-
lowing: an 8-channel MasterConsole II MCC8 model is connected to the
first channel on the base MasterConsole II, an 8-channel MasterConsole
P Model is connected to the sixth channel, and computers are connected
(or to be connected) to all other channels.
Note: If you specify a MasterConsole P Model, a pop-up box will
prompt for banking information.
See One-Tier Configuration for instructions on setting/changing other
operational parameters (AutoScan, AutoSkip, ID Display, hot-key, Menu
Display, PowerSave).
(dot) = computer (default)
= MCP2
= MCP4
= MCP8
= MCP16
= MCC4, MCS4, MCX4
= MCC8, MCS8, MCX8
= MCC16, MCX16

Figure 15. Device Types

Figure 16. Device Field