Assigning Names And Scan Rates (One-Tier) - Raritan MCC4 User Manual

Keyboard/video/mouse (kvm) switches

Hide thumbs Also See for MCC4:

User manual (46 pages)

Table Of Contents

Table of Contents

<Alt>.

To change the Menu Display position: Move to Menu and

press <Enter>. Then press the < >, < >, < >, and < > keys

to move the menu vertically and horizontally to the desired

position. Then press <Esc> or <Enter>.

To change the Channel ID display position: Move to ID and

press <Enter>. Then press the < >, < >, < >, and < > keys

to move the menu vertically and horizontally to the desired

position. Then press <Esc> or <Enter>.

To turn PowerSave ON/OFF (default is OFF): Move to Green

Mode and press the < >/< > keys to toggle. To change the

PowerSave delay time (default is 15 minutes): Move to the

next field and type a number from 01 to 99, or press the

< >/< > keys to change the interval (in minutes) of inactivity

(no keyboard or mouse operation) after which the video signal

will be cut off from the monitor. This will allow a properly

equipped monitor to enter low-energy mode.

To select Previous Channel Toggle (default is CapsLock).

This feature enables the user to toggle between the previous

and current selected channel. Press F4 to display the

Configuration menu (Figure 1) and move the cursor to the

Previous Channel Key. Use the <-> or <¯> keys to select the

key, <caps lock>, <scroll lock>, <num lock>, left <shift>, or left

<alt> to be used. This feature enables the user to switch back

to a previous channel by pressing the selected key twice rapid-

ly. There is no need to activate the OSUI.

NOTE: Select a previous channel key that is not being used as

the current hot key activator.

To exit the Configuration Menu: Press an appropriate Menu F

key to go to another menu, or press <Esc> to exit On-Screen

User Interface and return to normal computer operation. Any

changes made to the Configuration Menu are automatically

saved.