Safety Instructions; Basic Saftey Information - Triax ST-220 User Manual

Safety instructions

Read the safety instructions carefully before using the receiver operat-
ing.
Follow all warnings and information on the device and in the manual.
Basic Safety Information
Electrical Connection

In case of malfunction, disconnect the receiver from the power
source. Note: despite turning off power switch on the rear the re-
ceiver is still energized.

To avoid fire hazard and risk of electrical shock, do not expose the
receiver to rain or moisture

Never open the housing. There is a danger of electric shock. Con-
nect the receiver only to a professionally installed mains socket of
100-240 V, 50-60

The total power consumption by the antenna connection of the
receiver "LNB IN" must not exceed 300

Unplug the power cord from the wall outlet when the unit is not
used for an extended period. Unplug the AC power plug, not the
cord.

Pull out the power plug during a thunderstorm on the receiver from
the wall outlet. During a thunderstorm, also remove the cable of the
LNB from the

Should any solid object or liquid fall into the receiver, unplug the
power cord from the outlet. Have the unit checked by qualified per-
sonnel before bringing it back into operation. There is a danger of
electric shock. Please note that the current source (socket) should
be easily accessible.

Do not bend or crimp the power cord.

If the power cord is damaged, you have to repair the receiver of
personnel before they use it again. Otherwise there is a risk of
electric shock.

Never leave children unattended to use the receiver, or play with
the antenna system .Refer servicing to qualified personnel.
Hz.
receiver.
Seite 6 von 72
mA.