Table of Contents
Advertisement
• Antenna Setup
a.)
Instructions for setting "Permanently fixed antennas"
Satellite: Satellite selection.
are activated in the sub satellite list. Select to edit
LNB frequency: for the selected satellite set the LNB fre-
quency. Choose Universal or Unicable (SCR). Default set-
ting is universal.
Unicable:
A new window will open.
With IF Channel you can set the corresponding channel, at
Centre Freq. you can set the corresponding frequency .
Example: The first receiver is given IF Channel 1 and fre-
quency 1076 MHz.
The channels and the corresponding frequencies are speci-
fied by the SCR devices (LNB, multiswitch)
Transponder:
DiSEqC1.0:
22K:
Automatically set by the
Polarisation:
or vertical LNB supply voltage can be set.
.
b.) instruction for setting „Rotator Antenna"
(Antenna with rotator)
LNB Typ:
frequency. Default setting is universal.
Motor type:
local length/width:
rotator type
list of programmed
adjustment for multiple satellite reception
default setting is "AUTO". However, horizontal
Set the selected satellite, the corresponding LNB
Sets the type of
Only when "USALS" is selected in Item
Seite 38 von 72
The satellites are listed, which
transponder.
receiver.
rotator.
satellite.
Advertisement
Table of Contents
