Erstinstallation; Select The Menu Language - Triax ST-220 User Manual

First Time Installation wizard
After you have read the safety instructions and the chapter "Connect-
ing your receiver" successfully please connect the device to the power
supply and the set the power switch on the back to "on". The initial
booting takes about 15 seconds (display "boot")
During the booting process the display will show "Strt" and the screen
displays the welcome screen of the installation wizard. Make sure that
the TV is connected to the HDMI or the TV Scart output of the receiv-
er!
With the help of the installation wizard, you can adjust very easily the
most important settings on your digital receiver

Select the menu language

The first installation step is to select your preferred language using the CH + or CH-
buttons and confirm with OK. Then press the blue function key for the next step.
Seite 23 von 72