Triax ST-220 User Manual page 34

the red function key to disable the function. When leaving the menu
with the back button, and confirm the prompt with a lock marked pro-
grams are blocked. These programs can now be seen only after enter-
ing the current PIN.
Note: In the menu under System Settings - PIN must be enabled to
select channel lock. Is it disabled, the locks are shut down until the
selection program lock is reactivated
3. Skip:
Green function button on the remote control. The "Skip" is raised and
has been activated. Select the desired program, which should be
skipped out. This is highlighted by pressing the OK button with an
arrow. You can now select other programs and select by pressing the
OK button to skip. Press the green function key to disable the function.
When leaving the menu with the back button, and confirm the prompt
to skip the stored programs. At the "zapping" of the programs, these
programs are skipped.

Were the changes in items FAV and Lock enabled and skip
through confirmation of the question, they may in the same
manner as described above, be
4. Move:
Press the yellow button on the remote control. The "Move" is raised
and has been activated. Select the desired program, which is to be
moved by pressing the OK button.

You can move multiple programs simultaneously, by select-
ing them by pressing the OK
Select using the CH + and CH- buttons your preferred channel num-
ber. Press the yellow function key, the shift is performed. Exit this
menu with the back button, and confirm the security question.
5. Edit:
Press the blue button on the remote
reversed..
button.
control.
Seite 34 von 72
A new menu opens.