Table of Contents
Advertisement
ed, the CI+ or CI module with the smart card must be
inserted in the Common Interface slot
To remove the module from the Common Interface slot, open the flap
and press the button on the right side of the Common Interface slot.
You can now remove the module with the inserted smart
• Software-Update (requires password entry)
USB-Update: Software-Update via USB port.
The software update via the USB interface is the fastest
and most convenient way of software updates. If you
perform a software update, the method via the USB inter-
face is preferable. Current software under www.triax-
gmbh.de.
Update via satellite: The necessary data are preset. The
process starts when you confirm "Start" and press the OK
button. The receiver is prepared for this service, ie not al-
ways a new software version has to be available on a satel-
lite.
The software update via satellite has nothing to do with
the storage of new TV channels, but only serves to up-
date the system software of the
The software update is not for the ordinary operation of
the receiver
You have to adjust your satellite system to the satellite
ASTRA 1 at 19.2 ° East, in order to perform the software
upgrade
The software update may take up to an
It is recommended in addition to the upgrade to load the default set-
ting. Please note that your specially created channel list will be
receiver.
Seite 51 von 72
correctly.
card.
hour.
lost.
Advertisement
Table of Contents
