• Timer setting
With the timer function, you can program the receiver to a specific
time an operation such as record. There are 8 independent Timer
slots available.
Untermenü
Timer Number
Timer Mode
Timer Service
Star Channel
Start Date
Start Time
Duration
Save the settings by clicking on the following "Save" with the
OK
button.
Beschreibung
Select the timer 1-8
Once, daily, weekly, off. Timer will be deac-
tivated when setting "off" is chosen
Channel: At the programmed time the re-
ceiver switches to the programmed event.
Recording: If an external USB storage device
is connected properly, you can schedule
recording a program (service is dependent
on the broadcaster).
Selection of channel
Enter the date when the event starts.
Enter the time when the event starts
Enter the duration of the event
Seite 47 von 72