Storing Readings In Memory - Tektronix DMM4040 User Manual

Hide thumbs Also See for DMM4040:

Table of Contents

addition to storing and recalling readings and configurations, a memory management

function is available to delete files.

To access the Memory functions, press the M key. The memory menu appears over

the five soft keys: RECALL CONFIG, RECALL READING, STORE CONFIG,

STORE READINGS, and MANAGE MEMORY.

Storing Readings in Memory

The Meter will hold up to 9999 readings in one internal memory file. With external

memory, the Meter will hold 999 additional readings files, each of which will store up to

10000 readings.

To store readings in internal memory:

1. Press M.

2. Press the STORE READINGS soft key shown above.

3. If not already highlighted, press the INTERNAL MEMORY soft key.

4. Press the #SAMPLES soft key.

5. To adjust the number of samples, press either <-- or --> to select a digit.

With the desired digit selected, press the soft key labeled -- to decrement the digit

or ++ to increment the character. When 2

secondary reading is counted as a sample and appears in a separate line/row in the

readings file.

6. With the desired number of samples set, press the ENTER soft key to return to the

store readings menu.

7. Press the START soft key to initiate measurement storing. The START soft key

will change to STOP which can be pressed to stop the storage process. When the

requested number of samples have been stored, the soft key label changes back to

START. The MEM annunciator in the display also illuminates while readings are

being stored.

For internal storage of readings, the number of readings stored will not

exceed 9999 readings regardless of the value set for number of samples.

0.5993

Note

Meas is enabled, each primary and

Front-Panel Operation

Controlling Trigger Functions

caw032.eps

3-19

Table of Contents

Dmm4050