Oce VL3622 User Manual page 260

4
Term
ECM
Ethernet
Fax ID
File extension
Forced memory reception
Frame Erase
Frame type
FTP
F code
G3
Gateway
Gradation
Gray Scale
Group
GSS-SPNEGO/
Simple/Digest MD5
Halftone
Hard disk
Host name
HTTP
Install
Internet Fax
IPP
IPsec
4-6
Description
Abbreviation for Error Correction Mode.
Error resend mode of G3 communication. It confirms whether the data is correctly
sent to the recipient or not, and if it is not correctly sent, it communicates by resend-
ing the same data. If the recipient is set for the ECM mode and the communication
is done in ECM unless ECM off is specified in this machine.
LAN transmission line standard.
The identifying code for the mutual recognition when transmitting faxes. Normally the
fax number is registered as the fax ID.
The characters added to the file name in order to identify file formats. The file exten-
sion is added after a period, for example, ".bmp" or ".jpg".
This is the function to store the received document in memory and to print if required.
This is a function to erase the black shadow around the document and then transmit
the fax, for example, when scanning the document formed of booklet or when scan-
ning a document by keeping ADF open.
Type of communication format used in a NetWare environment.
Communication is not possible if the same frame type is not used.
Abbreviation for File Transfer Protocol. A protocol for transferring files over the Inter-
net or an intranet on the TCP/IP network.
This is a communication procedure for the usage of sub address of T.30* standard-
ized by ITU-T (international telecommunication union) provided by Japanese Com-
munications Industrial Corporation. In the communication between fax machines
with the F code function, various functions that use F code can be utilized even if the
manufacturers of the fax machines are different. In this machine, F code is used in
the bulletin boards, relay request, relay transmissions, confidential communication,
and password transmission. (*Communication standard)
This is a fax communication mode standardized by the ITU-T (International Telecom-
munication Union). The communication modes are G3 and G4. G3 is currently the
most popularly used mode.
Hardware and software used as the point where a network is connected to a network.
A gateway also changes data formats, addresses, and protocols according to the
connected network.
The light and dark levels of an image. As the number increases, smoother brightness
variations can be reproduced.
Monochrome image expressed with black and white gradation information.
Grouping of the abbreviation No. of multiple groups. This function is useful when
there is a large number sequential broadcast and sequential polling received in the
same address.
Authentication methods for logging on to the LDAP server. The authentication meth-
od (GSS-SPENGO, SIMPLE or Digest MD5) for the LDAP server differs depending on
the server being used and the server settings.
The method of producing the light and dark parts of an image through varying sizes
of black and white dots.
Large capacity storage device for storing data.
The data can be stored even if the power is turned off.
Displayed name of a device over a network.
Abbreviation for HyperText Transfer Protocol. A protocol used to send and receive
data between a Web server and a client (Web browser). Documents containing im-
ages, recordings, or video clips can be exchanged with the expressive form informa-
tion.
To install hardware, operating systems, applications, printer drivers on to a compu-
ter.
Transmission method by which scanned documents are sent and received between
an Internet fax and computers as TIFF format E-Mail attachments over intranets (in-
ternal company networks) and the Internet.
Abbreviation for Internet Printing Protocol. A protocol that sends and receives print
data and controls printers over a TCP/ IP network such as the Internet. Data can also
be sent to printers in remote areas to be printed over the Internet.
The security technology that is used with TCP/IP. A service with enhanced security
can be provided by specifying the encryption of transmission packets and the au-
thentication protocol.
Appendix
VL3622/VL4222/VL5022