Oce VL3622 User Manual page 131

Setup items by operation
Item
SNMP
UDP Port Setting
SNMP v1/v2c Setting
Read Community
Name
Write Community
Name
SNMP v3 Setting
Context Name
Discovery User Name
Read User Name
Security Level
auth-password
priv-password
Write User Name
Security Level
auth-password
priv-password
Encryption Algorithm
Authentication Method
VL3622/VL4222/VL5022
Definition
Specifies whether to use the SNMP. If yes, specify
whether to use SNMP v1/v2 (IP), SNMP v3, and SNMP v1
(IPX).
SNMP v1 (IPX) can be specified only when IPX is ena-
bled.
Default setting: 161
Specify the UDP port number.
Specify settings for using SNMP v1/v2c.
Specify the community name to be used for scanning (up
to 15 characters).
Specify the community name to be used for reading and
writing (up to 15 characters).
Specify settings for SNMP v3.
Specify the context name (up to 63 characters).
Specify the user name for detection (up to 32 characters).
Specify the name of read only user (up to 32 characters).
Specify the security level for read only user.
Specify the read only user authentication password to be
used for authentication (up to 32 characters).
Specify the read only user privacy password to be used
for privacy (encryption) (up to 32 characters).
Specify the reading/writing user name (up to 32 charac-
ters).
Specify the security level for reading/writing user.
Specify the reading/writing user authentication password
to be used for authentication (up to 32 characters).
Specify the reading/writing user privacy password to be
used for privacy (encryption) (up to 32 characters).
Specify the encryption algorithm.
Specify the authentication method.
2
Prior confirmation
Protocol to be used
(TCP/IP or IPX/SPX)
2-115