Oce VL3622 User Manual page 216

2
When "Fax" was selected using [New Registration]
!
Detail
Appears if the optional fax kit has been installed.
Item
No.
Name
Index
Destination
Line Setting
Communication Setting
Limiting Access to Desti-
nations
When "IP Address Fax" was selected using [New Registration]
!
Detail
The display is made only when the use of the IP Address Fax Function is available.
Item
No.
Name
Index
Host Address
Port No.
Limiting Access to Desti-
nations
When "Internet Fax" was selected using [New Registration]
!
Detail
This window appears if the Internet fax function is available.
Item
No.
Name
Index
E-mail Address
Resolution
Paper Size
Compression Type
Limiting Access to Desti-
nations
2-200
Definition
Specify the registration number ("Use opening number" or "Direct Input").
Type in the address name (up to 24 characters).
Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Enter the fax number for the destination (up to 38 characters).
Specify the line to be used. This item is enabled if the optional fax multi line is installed.
Click [Display], and then select the check box for the displayed item ("V34 off", "ECM Off",
"International Communication" or "Check Dest. & Send").
Specify the group that is allowed to access a destination and reference allowed level.
Definition
Specify the registration number ("Use opening number" or "Direct Input").
Type in the address name (up to 24 characters).
Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Specify the IP address of the fax of the destination.
If the DNS server is specified, the address can be specified using the host name.
Specify the port number to be used.
Specify the group that is allowed to access a destination and reference allowed level.
Definition
Specify the registration number ("Use opening number" or "Direct Input").
Type in the address name (up to 24 characters).
Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Enter the address for the destination (up to 320 characters).
Specifies the resolution.
Specifies the paper size.
Specify the compression method.
Specify the group that is allowed to access a destination and reference allowed level.
Setup items by operation
VL3622/VL4222/VL5022