NetComm GATEWAY SERIES User Manual page 22

Step 3 – Enter your time zone and click "Next"
Step 4 - Select your connection type and click "Next". If you are not sure what your conenction type is, leave it as the default.
Step 5 - Enter the connection information provided by your ISP and click "Next".
NOTE: Users in Australia should be able to keep the defaults. For users in New Zealand, change the Protocol Mode to PPPoA VC-Mux and the VPI/VCI values to 0/100
Step 6 – Please click "NEXT" to confirm your changes.
Step 7 – Please click "CLOSE" to exit the Quick Start Wizard
ADSL2+ Modem Router User Guide
22
YML14WN
www.netcomm.com.au