Network Settings; Further Configuration And Reset; Connecting To Your Netcomm M1 Wireless Network From Mac Os X - NetComm N150 User Manual

Further Configuration and Reset

The NetComm m1 has been designed to work with minimal user configuration. However if you would like to set any advanced options this
can be done using the "Advanced" section of the web browser based user interface.
Advanced Settings
To access the advanced menu, click on 'Advanced Settings' located at the top of the web based user interface.
Changing Wireless Settings
After logging in to the web based user configuration as described above, click on "Basic Settings" and then select "Wireless" from the
menu on the left hand side to modify your network name, wireless security password or encryption strength. Save your settings by clicking
the "Save" button.
Setting a custom APN or other 3G Network settings
After logging in to the web based user configuration as described above, click on "Basic Settings" and select "Network Setup" to modify
the 3G network settings. Save any changes by clicking the "Save" button.
Reset
If you make any errors the NetComm m1 can be reset to factory defaults by holding the WPS button for 10 seconds.

Connecting to your NetComm m1 Wireless Network from Mac OS X

Follow these steps to connect your MAC OSX computer to your NetComm m1 wireless network.
Click on the 'Apple' icon at the top left hand corner of your screen.
Click on 'System Preferences' option.
Under the 'System Preferences' parameters, click on the 'Network' icon under 'Internet & Network.
3G Wireless N150 Mini Router m1-User Guide
12
YMLM1WN
www.netcomm.com.au