Errors, Warnings And Messages During Start Up; Switching To Standby; Switching Off - Barco FLM HD20 User Manual

6. Getting started
2 3 4
1
6 8 9
7
RGB PATTERN WINDOW PIP
STBY PAUSE TEXT AUTO
A
Image 6-3
Stand by indication
A Stand by indication on local keypad
B Stand by indication on remote control
The projector status LED lights up.
The projector starts up on the last saved source.
Some lamp and runtime warnings can be displayed when an image is displayed after a start up.
6.3.2

Errors, warnings and messages during start up

Temperature error DMD
When the temperature of one of the DMD's is too low or too high the projector is switched automatically to standby. An error code
will be displayed on the local LCD panel. For a list of possible error codes, see "Error codes", page 193.
6.3.3

Switching to standby

How to switch to standby?
1. Press Standby to switch the projector to standby.
Switching to Standby. When the projector is running and you want to go to standby, press the standby key
for 2 seconds. Do not press any longer on the standby key otherwise the projector will restart.
All custom settings are written to the internal backup device. A message 'Save data ...' indicates this process.
Never switch off the projector while this message is displayed.
6.3.4

Switching off

How to switch off the projector?
1. Press first Standby.
46
B
5
EXIT
MENU
0
LENS
ENTER
RIGGING
MENU
EXIT
ENTER
PAUSE LENS TEXT
PHASE
9 0
SHARPN
8
7
TINT
6
5
COLOR
3 4
BRIGHTN
1 2
CONTR
LENS LENS
ZOOM SHIFT
LENS LENS
SHIFT
FOCUS
R59770180 FLM HD20 11/07/2008