Errors, Warnings And Messages During Start Up; Switching To Standby - Barco FLM HD18 User Manual

6. Getting started
The actual input voltage is indicated on the voltmeter just above the power switch.
Starting image projection via the standby key.
1. Press Stand by key once on the local keypad or on the remote control.
4
1 2 3
6 7 8 9
RGB PATTERN WINDOW PIP
STBY PAUSE TEXT AUTO
A
Image 6-3
Stand by indication
A Stand by indication on local keypad
B Stand by indication on remote control
The projector status LED lights up.
The projector starts up on the last saved source.
Some lamp and runtime warnings can be displayed when an image is displayed after a start up.
6.3.2

Errors, warnings and messages during start up

Temperature error DMD
When the temperature of one of the DMD's is too low or too high the projector is switched automatically to standby. An error code
will be displayed on the local LCD panel. For a list of possible error codes, see "Error codes", page 211.
6.3.3

Switching to standby

How to switch to standby?
1. Press Standby to switch the projector to standby.
A cool-down counter (after cooling) starts counting down for 5 minutes (only visible on the local LCD panel). During this period
the fans are still running.
A restart is possible during this period.
46
B
5
EXIT
MENU
0
LENS
ENTER
RIGGING
MENU
EXIT
ENTER
TEXT
PAUSE LENS
PHASE
9 0
SHARPN
7 8
TINT
6
5
COLOR
3 4
BRIGHTN
1 2
CONTR
LENS LENS
ZOOM SHIFT
LENS
LENS
FOCUS SHIFT
R5976986 FLM HD18 15/03/2010