Barco FLM HD20 User Manual page 170

14. Service menu
4. Use the ▲ or ▼ key to select USB memory and press ENTER.
5. Use the ▲ or ▼ key to select Load custom settings and press ENTER.
An list of serial numbers is given.
6. Use the ▲ or ▼ key to select the serial number to start from to load the settings.
The settings from the selected projector on the USB device are loaded into the current attached projector. The current projector
settings are overwritten with these settings.
Image 14-56
Image 14-59
166
Image 14-57
Image 14-58
R59770180 FLM HD20 11/07/2008