Removal Of The Side Cover - Barco FLM HD20 User Manual

17. Removal of the projector covers
Image 17-2

17.2 Removal of the side cover

C
AUTION
cover in an area which is subject to airborne contaminants such as that produced by smoke machines or
similar.
Necessary tools
7 mm flat screw driver.
How to remove the side cover of the projector ?
1. Release the captive screw at the middle bottom of the side cover, using a flat screw driver.
Image 17-3
2. Remove the side cover from the projector doing the following:
a) gently pull out the bottom corners (A) of the side cover,
b) then gently pull out the top corners (B) of the side cover,
c) then move the side cover away from the projector (C).
Image 17-4
180
:
Remove the side cover of the projector only in a clean and dust free area. Never remove the side
R59770180 FLM HD20 11/07/2008