Table of Contents
Advertisement
Chapter 5 Wireless Configuration
This chapter describes the ENH700EXT's wireless settings.
5.1 Selecting Operating Modes
The ENH700EXT supports three operating modes: Access Point, Client Bridge, and Client Router.
Using the procedures in the following sections, you can configure the ENH700EXT to use one
operating mode for a 2.4 GHz network and another operating mode for 5 GHz networks (see section
5.1.1), or the same operating mode for 2.4 GHz and 5 GHz networks (see section 5.1.2).
5.1.1 Selecting Separate Operating Modes for 2.4 GHz and 5 GHz Networks
To select a separate operating mode for 2.4 GHz and 5 GHz networks, use the following procedure.
1. Under the Management section, click Operation Mode. The following page appears.
2. At the top of the page, click Separate Mode.
Advertisement
Table of Contents
