Chapter 3 Access Over Internet; Access Network Camera With Static Ip - HIKVISION Network Camera User Manual

Hide thumbs Also See for Network Camera:

Table of Contents

User Manual of Network Camera

Chapter 3 Access over Internet

3.1 Access network camera with static IP

When there is a static IP from an ISP, open some ports (such as 80 and 8000 ports) in the router.

Then a user can visit it through a web browser or client software via the internet. The steps for port

forwarding are different for each model of router. Please call the router manufacturer for assistance

with port forwarding or visit www.portforward.com.

Note: Refer to Appendix 2 for a detailed explanation about Port Map.

Users can directly connect the network camera to the internet without using a router.

Figure 3.1.1 Access IPC through Router with Static IP

Figure3.1.2 Access IPC with Static IP directly

For the client software to view the camera, in the adding equipment column, select the normal

model, and then fill in the IP info.

Table of Contents