Wireless Parameter Configuration - HIKVISION Network Camera User Manual

34
User Manual of Network Camera
2.2.3 Wireless Parameter Configuration
Note: This section is only for wireless network camera with mark '‐W' in the model number.
Click "setup" in the client software to enter the devices management interface. Right click the
device that needs to be configured, select "Remote Configuration" to enter the remote
configuration interface.
The way to configure the parameters in the client software is the same as the way in IE browser.
Please refer to section 2.1.3 for more detailed parameters configuration.
Figure 2.2.11 Client Software Wireless Configuration Interface
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.