Chapter 4: Install Octaplane Stacking Module - Avaya G700 Quick Start Installation Manual

Chapter 4: Install Octaplane Stacking Module

Note:
Complete these steps only if you are connecting more than one G700 Media
Note:
Gateway in a stack configuration.
1. Remove the blank faceplate from
the Octaplane slot on the back of
the media gateway.
2. Align the X330STK Octaplane
Stacking Module with the interior
guides and insert until firmly
seated
!
WARNING:
To prevent damage to
WARNING:
equipment, handle the
module by the
faceplate or edge.
3. Tighten the captive screws.
Issue 8 February 2007 15