Connecting the Optional Interface Board
Always turn off the power to the printer before connecting the
optional interface board. Do not pull the interface cable out with
unnecessary force. This will cause an accident.
Replacement Method
11
Remove the screws (2) of the interface cover then pull the
interface cable towards you1 When you do this, be careful not
to perform any unreasonable operations that will damage
the connecting cable and do not pull the cable too much1 If
you do, it will cause a malfunction1
Interface Cable
Rear Side
21
Connect the cable to the connector of the optional interface
board1
Rear Side
59
Caution
Interface Cover
Interface Board
Interface Cable
Appendixes
Screw