Connection To Power; Driver Installation - Citizen CL-S700DT User Manual

Connection to Power

11 The power switch is located on the front of the printer
recessed below the control panel1 Check that the power
switch is turned OFF1
21 Insert the power cord in to the inlet on the printer1
31 Insert the plug of the power cord in the AC outlet1
Power Switch
AC Outlet
Use an AC outlet that accepts a three-pronged plug. Otherwise, static
electricity may be generated and there will be danger of electric
shock.

Driver Installation

The computer may automatically detect the presence of the new printer
when it is first started, depending on the computer type, interface and
operating system. Follow any on-screen instruction and also instructions
supplied with any additional CD-ROM or floppy disk included with your
printer.
Your supplier will assist you with the correct drivers and software which are
compatible with your particular computer system.
17
Power Cord Inlet
Caution
Setup