2
Printer Operation
Setting the Media
Media Sizes (p.22)
Installing the Media
11
Push the large blue head-open lever to release the head unit,
and then lift the damper arm by hand as shown below1
Head unit
Large blue-head open lever
21
Firstly, slide the two black plastic parts of the media holder
assembly together1 Ensure correct alignment of the guide
with the bar as it can only be installed in one direction1
31
Slide the roll of media over the media bar1 The media guide
must be on the right side of the roll of media (as viewed from
the front of the printer) with the flat surface of the media
guide touching the roll1
24
Damper arm open lever
Damper arm
Media holder bar
Media holder guide