Media Width Adjustment - Citizen CL-S700DT User Manual

3
Printer Adjustments
Installing the Media (p.24)
Self Print Mode (p.27)

Media Width Adjustment

The printer is already factory-set to the value of media width: 112 mm
(4.4 in). When you use narrow media, adjust the printhead pressure in the
following:
11 Looking in at the check window on the upper frame, align
the mark (the left end of white plastic) with the width of
media by turning the media width adjustment knob1 (The
printhead must be closed1)
21 Make fine adjustments by checking the self-test print1
When the print on right side is too light:
Move the mark (white) to the right side by turning the media
width adjustment knob clockwise1
When the print on the left side is too light:
Move the mark to the left side by turning the media width
adjustment knob counterclockwise1
Media width check window
Check window
46
Media width adjustment knob
Width of media
25.4 mm 1 in
50.8 mm 2 in
76.2 mm 3 in
101.6 mm 4 in
When media width is 4 in or
more
Factory setting