1
Setup
Serial Interface (p.53)
USB Interface (p.58)
Connecting the Optional
Interface Board (p.59)
Connection to a Computer
This product has two interfaces that can be used to receive printing data: a
serial port (RS232C) and a USB port (USB1.1). An optional internal network
interface or parallel interface (IEEE1284, Non-L. P. S.) can be added by your
dealer.
To connect the cable, proceed as follows:
11
Turn OFF both power switches of the printer and the
computer1
21
Connect one end of the interface cable to the interface
connector on the back of the printer and secure it with locks
or locking screws, where available1
31
Connect the other end of the interface cable to the interface
connector on the computer and secure it with locks or
locking screws, where available1
Note: If an optional parallel interface or network interface is used, the
interface cover is removed from the printer.
18
Serial Interface Cable
USB Interface Cable