Installation - Tripp Lite B127-1A1-WHD1 Owner's Manual

Installation

Note: The TX and RX units must be reset to factory default settings prior to first use.
DVD
1. With a user supplied HDMI cable (such as Tripp Lite's P569-Series cable),
connect the Transmitter's HDMI IN port to the source (ex. Blu-ray™ player
or laptop).
2. With a user supplied HDMI cable, connect the Receiver's HDMI OUT port
to an HDMI-compliant display (ex. monitor).
3. Connect the included power supplies to the Transmitter and Receiver units.
A blue Power LED will illuminate on each unit to indicate sufficient power is
being supplied.
4. (Optional) If a power outlet is not available, you can power the Transmitter
and Receiver units via the Micro-B USB port (USB-A to Micro-B cables not
included).
5. When establishing a wireless connection, ensure both the Transmitter
and Receiver units are close to one another. Doing so will help create a
successful pairing.
Note: This Extender Kit operates in line-of-sight only. The Receiver and Transmitter
units will NOT transmit through walls, glass or brick. Make sure to install in an
environment where few obstacles are present.
19-06-126-9339AD.indb 5
HDMI Cable
TX
Power
30m HDMI Cable
RX
Power
5
HDMI Display
7/17/2019 11:58:48 AM