Advertisement
Installation
1. Before installation, be sure your HDMI source's refresh rate is 24 Hz.
You can do this by accessing the settings in the menu of your Blu-ray
player or other HDMI source. Be sure the settings for 24p Output and
1080p Resolution are turned on.
Note: The 4K upscale feature will not work if your HDMI source's refresh rate is 60 Hz.
2. Before installation, be sure the power to all devices you are connecting
to this unit is turned off.
3. Connect the HDMI source to the unit's HDMI input port using an HDMI
cable, such as Tripp Lite's P568-Series (see Optional Accessories).
Note: The cable connecting the source to the unit must be no longer than 16 feet.
4. Connect the unit's USB Micro-B port to a USB port on the display or a
USB wall charger using the included USB Micro-B cable.
5. Connect the unit's built-in HDMI cable to the display's HDMI input port.
Troubleshooting
If you are unable to get an acceptable image after following the installation
instructions above, try the following troubleshooting tips.
1. Is the USB Micro-B cable connected and plugged into a working
power source?
The unit must be connected to and receiving power from the USB
Micro-B cable in order to function properly.
2. Was the power to the source turned off before installation?
If not, restart your computer, Blu-ray player or other HDMI source.
3. What resolution are you trying to reach?
See the Product Features and Installation sections for details on
maximum distance and resolution. The shorter the distance, the higher
the resolution you will be able to obtain. If you are unable to get an
acceptable range, try lowering your display's video resolution or adjusting
the refresh rate.
17-12-283-93371A-EN.indd 3
3
1/26/2018 1:28:05 PM
Advertisement
