Table of Contents
Advertisement
generally used when you add more units to an existing system. Turning off and then on the controller
has the same effect.
[Reset to factory settings]
This function will reset all the settings to the factory defaults except for [Custom] programs.
Factory Default Settings
Setting
[Schedule]
[Wash program]
[Effect program]
[DMX address]
[Range]
[Allow edit]
[Password ON/OFF]
[Set password]
Activating password mode
Set [Password] function to [ON]. This will prompt the user for a password every time the
controller is powered on.
Toggle to [Set password] function in order to change the password.
Input an 8 digit password using the [UP] & [DOWN] keys. Press the [SET] button to confirm.
Control via external DMX
Programs in the controller can be accessed via an external DMX controller. It will be necessary to
have the DMX address set on the COLORado Controller. The controller operates on 4 channels of
control.
DMX Channel Values
C
HANNEL
1
2
COLORado™ 3 User Manual
Default
All times in schedule are reset to [00:00]
Step times and fade times are reset to [001]
Speeds are reset to [001]
DMX address is reset to [001]
Range is reset to [066]
Reset to [Yes]
Password is reset to [OFF]
Password is reset to [00000000] Down=0, Up=1
Note
In the event that the user forgets the password use the following factory
password override:
[UP] Ü [DOWN] Ü [UP] Ü [DOWN] Ü [UP] Ü [UP] Ü [DOWN] Ü [DOWN]
V
F
ALUE
UNCTION
000 ó 010
Blackout
011 ó 030
Wash [1]
031 ó 040
Blackout
041 ó 060
Wash [2]
061 ó 070
Blackout
071 ó 090
Wash [3]
091 ó 100
Blackout
101 ó 120
Wash [4]
121 ó 130
Blackout
131 ó 150
Wash [5]
151 ó 160
Blackout
161 ó 180
Wash [6]
181 ó 190
Blackout
191 ó 210
Wash [7]
211 ó 220
Blackout
221 ó 255
Wash [8]
000 ó 010
Blackout
011 ó 030
Effect [1]
031 ó 040
Blackout
041 ó 060
Effect [2]
061 ó 070
Blackout
071 ó 090
Effect [3]
091 ó 100
Blackout
101 ó 120
Effect [4]
31
Operating Instructions
1/30/2012 10:56 AM
Advertisement
Table of Contents
