Colorado™ Controller; Overview; Setup - Chauvet COLORado 3P User Manual

5. COLORado™ Controller

Overview

Setup

MODE
SETUP
UP
DOWN
Connect from the OUT on the controller to the DMX Input side of the COLORado™ using a DMX
XLR cable. Visit the section titled: Setting up a DMX Serial Data Link on Page 13.
It is recommended that you power up all COLORado units connected prior to turning on the
controller. This ensures that the controller will auto-detect DMX addresses.
Alternatively you can use {Detect device} from the {Settings} menu.
Set ID addresses on the COLORados in ascending order.
Set the {Range} in the {Settings} menu.
COLORado™ 3 User Manual
LCD Display Panel
MODE SETUP UP
Accesses main menu or backs out of sub-menu
Selects the currently displayed menu or confirms the current function value
Use to navigate upwards through menu items or increment function values
Use to navigate downwards through menu items or decrement function values
Note There is no need to set ID and Range for {Wash} programs.
DOWN
28
Sold
Separately
2012-01-30/10:56