Chauvet COLORado 3P User Manual page 25

Important Notes about Stage 2 Mode 1
Re d, G r e e n a nd Bl ue Sel e c t i on
· Channels 2, 3 and 4 control overall intensity of each respective color.
· Channels 2, 3 and 4 can be combined to create an unlimited range of colors.
St r obe
· Strobe occurs at every channel with the exception of Channels 7 and 10.
· Speed of the strobe is adjustable from 0 to 20 Hz.
M ode Se l e c ti on
· Channel 9 values 5-244 provides mode selection and can only be activated while
Channels 1 through 7 are at value 0. When channel 9 is between 245 and 255, channels
1 through 7 can be any value.
· When Color-Cycle mode 4 is selected channel 9 controls the speed.
I D a ddr e s s s e l e ct i on
· Use channel 8 to select ID addressed fixtures.
· Each independent DMX address can have up to 66 ID addressed fixtures.
· ID address "0" allows control of all fixtures simultaneously.
M odul e s el e c t i on
· Provides individual control of the three LED modules in each fixture.
· Channel 9 has priority over channel 10.
Ef f e c t m a c r o
· These are pre-programmed color patterns and module chases.
· Channel 10 has priority over channels (1, 2, 3, 4).
· Channel 10 has priority over channel 9 if first activated.
COLORado™ 3 User Manual 25
Operating Instructions
1/30/2012 10:56 AM