Table of Contents
Advertisement
Menu Map
M
F
AIN
UNCTION
Static color
DMX512 address
Personality
Run Mode
Auto program
Settings
Password
Manual Power ON/OFF
The COLORado™ can be turned on and off using the control panel.
P
OWER
Turn OFF
Turn ON
COLORado™ 3 User Manual
S
-F
S
UB
UNCTION
ELECTION
Red
Green
000 ~ 255*
Blue
(0 ~ 100%)
Yellow
*Strobe range
Cyan
is 0 ~ 20 (000
Purple
~ 255)
White
Strobe
001 ~ 512
STAGE 1
STAGE 2
PIXEL
ARC 1
ARC+D
DMX
CON
1
2
3
4
5
6
7
8
ID address
01 ~ 66
ID ON/OFF
On ~ Off
ADAS faders no
01 ~ 244
ADAS ON/OFF
On ~ Off
ADAS copy
On ~ Off
Factory settings
Reset confirm
Dimmer start
001 or 005
ON/OFF
On ~ Off
Set Password
[????????]
A
CTION
When {MENU} is displayed in the LCD panel, hold down the (EXIT) button for 3
seconds to turn off the fixture.
Hold the {EXIT} button for 3 seconds to turn power on.
I
NSTRUCTION
· User can combine Red, Green and Blue
to generate a custom color
· Select intensity over pre-composed
colors yellow, cyan, purple and white
· Select strobing frequency between 0
and 20Hz
· Sets the DMX starting address
RGB for each module
RBG
RGB + D
To operate with DMX control
To operate with the COLOr-CON
· Choose from 8 Automatic run programs
Assigns the ID address to a fixture
Either enables or disables ID addressing
Sets the number of ADAS channels for use
when automating DMX channel assignment
Enables the Automatic DMX512
Addressing System
When activated the DMX512 address
assigned by the ADAS will become
permanent on the fixture
Resets fixture to factory default settings
When password is set to on the control
panel will ask for a password each time the
control panel is accessed
Use UP and DOWN buttons to set and
press SET to confirm
Note! If you forget the password use the
following factory password:
UP, DOWN, UP, DOWN, UP, UP, DOWN,
DOWN
18
Operating Instructions
1/30/2012 10:56 AM
Advertisement
Table of Contents
