Configuration; Test Mode; Setup - Chauvet COLORado PXL Bar 16 User Manual

Configuration

Test Mode

Auto Test
To perform an auto test of the COLORado PXL Bar 16, follow the instructions below:
1. Go to the Run Mode main level.
2. Select Auto Test.
Manual Test
To test the functions of the COLORado PXL Bar 16 manually, do the following:
1. Go to the Run Mode main level.
2. Select Manual Test.
3. Select the function (Tilt, P/T Speed, Red, Green, Blue, White, CTC, Color, Pattern, LED Macro,
LED Ma. Speed, LED Ma. Fade, Background, Background Dim., Dimmer, Shutter, Function,
Zoom1, and Zoom2) to test.
4. Change the value of the tested function, 000–255.

Setup

Network Settings
To adjust the IP Mode, IP Byte, and SubMask settings, follow the instructions below:
1. Go to the Setup main level.
2. Select Network Settings.
IP mode
The IP address of the COLORado PXL Bar 16 can be set manually, by the network, or to a preset static
address specific to each product. To set the IP Mode, do the following:
1. Navigate to Network Settings.
2. Select IP Mode.
3. Select among:
• Manual – set the IP address with the control panel
• DHCP – the network sets the IP address
• Static – a preset address specific to each product
IP byte
In Manual IP Mode, the IP address must be assigned using the product menu. To set the IP address in
Manual IP Mode, follow the instructions below:
1. Navigate to Network Settings.
2. Select IP.
3. Select from IP Byte 1 to 4.
4. Change the value of each IP Byte, 000–255.
Subnet mask
In Manual IP Mode, the Subnet Mask must be assigned using the product menu. To set the Subnet Mask
in Manual IP mode, do the following:
1. Navigate to Network Settings.
2. Select SMK.
3. Select from SubMask 1 to 4.
4. Change the value of each SubMask, 000–255.
Tilt Orientation
To set whether the tilt orientation is normal or inverted, follow the instructions below:
1. Go to the Setup main level.
2. Select Tilt Reverse.
3. Select NO (normal tilt) or YES (reversed tilt).
Zoom Orientation
To set whether the zoom goes from wide to narrow or from narrow to wide, do the following:
1. Go to the Setup main level.
2. Select Zoom Reverse.
3. Select NO (wide to narrow) or YES (narrow to wide).
Page 32 of 40 COLORado PXL Bar 16 User Manual Rev. 1
Operation