Grandstream Networks HandyTone-286 User Manual
Grandstream networks user manual analog telephone adaptor handytone-286
Hide thumbs
Also See for HandyTone-286:
- User manual (26 pages) ,
- User manual (43 pages) ,
- User manual (24 pages)
Related Manuals for Grandstream Networks HandyTone-286
Summary of Contents for Grandstream Networks HandyTone-286
-
Page 1: User Manual
User Manual HandyTone-286 Rev 3.0 Analog Telephone Adaptor For Firmware Version 1.0.8.16 Grandstream Networks, Inc. www.grandstream.com... -
Page 2: Table Of Contents
6.2.1 Access the Web Configuration Menu 6.2.2 End User Configuration 6.2.3 Advanced User Configuration 6.2.4 Saving the Configuration Changes 6.2.5 Rebooting the HandyTone-286 from Remote ONFIGURATION THROUGH A SOFTWARE UPGRADE WITH TFTP IRMWARE PGRADE THROUGH ONFIGURATION IRMWARE AND ONFIGURATION ANAGING... - Page 3 HandyTone -286 User Manual Grandstream Networks, Inc GLOSSARY OF TERMS...
-
Page 4: Welcome
HandyTone -286 User Manual Grandstream Networks, Inc Welcome Congratulations on becoming an owner of HandyTone-286. You made an excellent choice and we hope you will enjoy all its capabilities. Grandstream's award-wining HandyTone-286 is innovative Analog Telephone Adaptor that offers a rich set of functionality and superb sound quality at ultra-affordable price. -
Page 5: Installation
HandyTone -286 User Manual HandyTone-286 is a VoIP Analog Telephone Adaptor designed to work with an ordinary analog telephone. The following photo illustrates the appearance of a HandyTone-286. RJ45 10M Ethernet Interconnection Diagram of the HandyTone-286: Internet ADSL/Cable Modem Ethernet... -
Page 6: What Is Included In The Package
3) One Ethernet cable Safety Compliances The HandyTone-286 is compliant with various safety standards including FCC/CE and C-Tick. Its power adaptor is compliant with UL standard. The HandyTone ATA should only operate with the universal power adaptor provided in the package. -
Page 7: Product Overview
• Support firmware upgrade via TFTP or HTTP • Support SIP Session Timer • Support Syslog (on Rev.2.0) • Ultra compact (wallet size) and lightweight design, great companion for travelers • Compact, lightweight Universal Power adaptor Product Overview Grandstream Networks, Inc... -
Page 8: Hardware Specification
HandyTone -286 User Manual Hardware Specification The table below lists the hardware specification of HandyTone-286. Model LAN interface Button Universal Power Adaptor Dimension Weight Operating Temperature Humidity Compliance HandyTone-286 1xRJ45 10Base-T GREEN & RED color Input: 100-240VAC Output: +5VDC, 1200mA... -
Page 9: Basic Operations
HandyTone-286 stores a voice prompt menu for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button on the HandyTone-286 or pick up the phone and dial “***”. The following table shows how to use the voice prompt menu to configure the device. -
Page 10: Make Phone Calls
To make a direct IP call, first pick up the analog phone or turn on the speakerphone on the analog phone, then access the voice menu prompt by dial “***” or press the button on the HandyTone-286, Grandstream Networks, Inc... -
Page 11: Call Hold
2. Then A dials *87 then dials C’s number, and then #(or wait for 4 seconds) 3. A can hang up. NOTE: “Enable Call Feature” has to be set to “Yes” in web configuration page. A can hold on to the phone and wait for one of the three following behaviors: Grandstream Networks, Inc... -
Page 12: 3-Way Conferencing
5.2.6 3-way Conferencing HandyTone-286 supports 3-way conference. Assuming that call party A and B are in conversation. A wants to bring C in a conference: 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone. -
Page 13: Fax
HandyTone-286 supports FAX in two modes: T.38 (Fax over IP) and fax pass through. T.38 is the preferred method because it is more reliable and works well in most network conditions. If the service provider supports T.38, please use this method by selecting Fax mode to be T.38. -
Page 14: Led Light Pattern Indication
Message Waiting Indication RINGING RINGING INTERVAL In Conversation Grandstream Networks, Inc Button flashes every 2 seconds (if DHCP is configured) Button flashes every 2 seconds (if SIP server is configured) Button flashes every 2 seconds... -
Page 15: Configuration Guide
6.1.2 STATIC IP Mode Follow section 5.1 with voice menu option 01 to enable HandyTone-286 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively. 6.1.3 TFTP Server Address Follow section 5.1 with voice menu option 06 to configure the IP address of the TFTP server. -
Page 16: End User Configuration
Registered: Yes PPPoE Link Up: disabled NAT: detected NAT type is full cone NAT Mapped IP: 67.153.142.80 Grandstream Device Configuration Login All Rights Reserved Grandstream Networks, Inc. 2005 Grandstream Device Configuration Program-- 1.0.8.16 Bootloader-- 1.0.8.9 HTML-- 1.0.8.16 VOC-- Grandstream Networks, Inc... - Page 17 This shows whether the PPPoE is up if connected to DSL modem This shows what kind of NAT the HandyTone-286 is behind. NAT Mapped IP WAN side mapped IP if HandyTone-286 is connected to a NAT router. All Rights Reserved Grandstream Networks, Inc. 2005 Grandstream Networks, Inc...
-
Page 18: Basic Settings
HandyTone -286 User Manual NAT Mapped Port WAN side mapped port if HandyTone-286 is connected to a NAT router. Statistical Status Self-explainable. Please refer to the page displayed. • Basic Settings. STATUS BASIC SETTINGS ADVANCED SETTINGS End User Password: IP Address:... -
Page 19: Advanced User Configuration
SIP Server: Outbound Proxy: any) SIP User ID: Grandstream Device Configuration (purposely not displayed for security protection) sip.mycompany.com (e.g., sip.mycompany.com, or IP address) (e.g., proxy.myprovider.com, or IP address, if 12345678 (the user part of an SIP address) Grandstream Networks, Inc... - Page 20 (between 96 and 127, default is 97) (up to 10/20/32/64 for G711/G726/G723/other codecs respectively) T.38 (Auto Detect) Pass-Through (Diff-Serv or Precedence value) 802.1p priority value 3600 (in seconds. default 1 hour, max 45 days) Grandstream Networks, Inc 5.3kbps encoding rate (0-7)
- Page 21 RTP (RFC2833) Yes (Flash will be sent as a DTMF event if set to Yes) 800 ms 600 Ohm (North America) Bellcore (North America) (reverse polarity upon call establishment and Grandstream Networks, Inc (URI or IP:port) via SIP INFO...
- Page 22 Config File Prefix: Yes, check for upgrade every Always Check for New Firmware Check New Firmware only when F/W pre/suffix changes Yes (cfg file would be authenticated before acceptance if Grandstream Networks, Inc HTTP Firmware File Postfix: Config File Postfix: 10080...
- Page 23 Name SIP service subscriber’s name which will be used for Caller ID display. Preferred Vocoder HandyTone-286 supports up to 7 different vocoder types including G711-ulaw (PCMU), G711-alaw (PCMA), G723, G729A, G726-32, and iLBC. Depending on the product model, some of these vocoders may not be provided in standard release.
- Page 24 Use DNS SRV This parameter controls whether the IP phone supports the DNS SRV route function. User ID is phone If the HandyTone-286 has an assigned PSTN telephone number, then this field number will be set to “Yes”. Otherwise, set it to “No”. If “Yes” is set, a “user=phone”...
- Page 25 HandyTone -286 User Manual Grandstream Networks, Inc SIP Registration This parameter controls whether the IP phone needs to send REGISTER messages to the proxy server. The default setting is “Yes”. Unregister On Default is No. If set to yes, the device will first send registration request to Reboot remove previous bindings.
- Page 26 SIP server to keep the mapped port open on the NAT. keep-alive interval The HandyTone-286 sends a UDP package to the SIP server periodically in order to keep the port open on the router. This parameter defines the interval time that HT286 send the UDP package.
- Page 27 HandyTone -286 User Manual Grandstream Networks, Inc Caller ID Scheme Select the Caller ID Scheme to suit the standard of different area. • Bellcore (North America) • CID (Canada) • DTMF (Brazil) • DTMF (Denmark) • DTMF (Sweden) • ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA) •...
- Page 28 SIP message summary (INFO level) inbound and outbound calls (INFO level) registration status change (INFO level) negotiated codec (INFO level) Ethernet link up (INFO level) SLIC chip exception (WARNING and ERROR levels) memory exception (ERROR level) example: Grandstream Networks, Inc 02:40:38 192.168.1.14 GS_LOG:...
- Page 29 If set to Yes, these four fields: SIP User ID, Authenticate ID, Authenticate Allow conf SIP Account Password and Name will be included in Basic Settings configuration page. in Basic Settings Override MTU size Override the MTU size. Grandstream Networks, Inc...
-
Page 30: Saving The Configuration Changes
STATUS Your configuration changes have been saved. Users are recommended to power cycle the HandyTone-286 after seeing the above message. 6.2.5 Rebooting the HandyTone-286 from Remote The administrator of the phone can remotely reboot the phone by pressing the “Reboot”... -
Page 31: Configuration Through A
HandyTone -286 User Manual Grandstream Networks, Inc At this point, the user can relogin to the phone after waiting for about 30 seconds. Configuration through a Central Server Grandstream HandyTone ATA can be automatically configured from a central provisioning system. -
Page 32: Software Upgrade With Tftp
Start the TFTP server, in the HandyTone ATA’s web configuration page, configure the Firmware Server Path with the IP address of the PC, update the change and reboot the unit. Please be advised that our client will pull out firmware from the WAN side, if Grandstream Networks, Inc... -
Page 33: C Onfiguration F Ile D Ownload
By defining different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time. Grandstream Networks, Inc... -
Page 34: Restore Factory Default Setting
Press “***” or the LED button for voice prompt. b. Enter “99” and get the voice prompt “Reset”. c. Enter the encoded MAC address of the device. d. Wait for 15 seconds. The device will reboot automatically and restore to factory default setting. Grandstream Networks, Inc... -
Page 35: Glossary Of Terms
Its purpose is IP network addresses to the hardware addresses used by a data link IPv4 is used over Ethernet silent time in a transmission resulting from Grandstream Networks, Inc Internet Protocol (IP) [RFC826], noise used in radio... - Page 36 A FQDN consists of a host and domain name, including top-level domain. For example, www.grandstream.com second-level domain, and.com is the top level domain. Foreign eXchange Office is a fully qualified domain name. www is the host, grandstream is the Grandstream Networks, Inc Internet service that translates...
- Page 37 Hyper Text Transfer Protocol; the World Wide Web protocol that performs the request and retrieve functions of a server Internet Protocol. A packet-based protocol for delivering data across networks. Grandstream Networks, Inc telephony to describe the process of removing telephone...
- Page 38 (voice, video etc) crosses the OBP/SBC. Without an OBP/SBC, the media traffic travels directly between the VoIP phones. Private OBP/SBCs are used along with VoIP calls to and from a protected enterprise network. Public VoIP service providers use Grandstream Networks, Inc packet or frame, specified in octets VoIP networks.
- Page 39 NAT with a particular local port. This information is used to set up UDP communication between two hosts that are both behind NAT routers. The protocol is defined in 3489. STUN will usually work good with non-symmetric NAT routers. Grandstream Networks, Inc 3550, a sister protocol of the RFC 1889...
- Page 40 VoIP encompasses many protocols. All the protocols do some form of signalling of call capabilities and transport of voice data from one point to another. e.g: SIP, H.323, etc. Grandstream Networks, Inc file transfer protocol, with the functionality of a...