Grandstream Networks HandyTone-286 User Manual page 28

HandyTone -286 User Manual
Syslog Level Select the ATA to report the log level. Default is NONE. The level is one of
Session Expiration Grandstream implemented SIP Session Timer. The session timer extension
Min-SE The minimum session expiration (in seconds). The default value is 90 seconds.
Caller Request
Timer
Callee Request
Timer
DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on
the following events:
•
product model/version on boot up (INFO level)
•
NAT related info (INFO level)
•
sent or received SIP message (DEBUG level)
•
SIP message summary (INFO level)
•
inbound and outbound calls (INFO level)
•
registration status change (INFO level)
•
negotiated codec (INFO level)
•
Ethernet link up (INFO level)
•
SLIC chip exception (WARNING and ERROR levels)
•
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it
contains the following components:
GS_LOG: [device MAC address][error code] error message
Here is an example:
[00:0b:82:00:a1:be][000] Ethernet link is up
enables SIP sessions to be periodically "refreshed" via a re-INVITE request.
Once the session interval expires, if there is no refresh via a re-INVITE
message, the session will be terminated.
Session Expiration is the time (in seconds) at which the session is considered
timed out, if no successful session refresh transaction occurs beforehand. The
default value is 180 seconds.
If selecting "Yes" the phone will use session timer when it makes outbound
calls if remote party supports session timer.
If selecting "Yes" the phone will use session timer when it receives inbound
calls with session timer request.
Grandstream Networks, Inc
May 19 02:40:38
28
192.168.1.14 GS_LOG:
.