Grandstream Networks HandyTone-286 User Manual page 29

Grandstream networks user manual analog telephone adaptor handytone-286
Hide thumbs Also See for HandyTone-286:
Table of Contents

Advertisement

HandyTone -286 User Manual
Force Timer If selecting "Yes" the phone will use session timer even if the remote party
UAC Specify
Refresher
UAS Specify
Refresher
Force INVITE Session Timer can be refreshed using INVITE method or UPDATE method.
Firmware Upgrade
and Provisioning
Firmware Server
Path
Config Server Path IP address or domain name of configuration server
Firmware File
Prefix
Firmware File
Postfix
Config File Prefix Default is blank. End user should keep it blank.
Config File Postfix Default is blank. End user should keep it blank.
Automatic Upgrade Default is YES.
Firmware Key 32 digit in Hexadecimal Representation. Useful for ITSP to encrypt firmware.
Authenticate Conf
File
Lock keypad
update
Allow conf SIP
Account
in Basic Settings
Override MTU size Override the MTU size.
does not support this feature. Selecting "No" will allow the phone to enable
session timer only when the remote party support this feature.
To turn off Session Timer, select "No" for Caller Request Timer, Callee
Request Timer, and Force Timer.
As a Caller, select UAC to use the phone as the refresher, or UAS to use the
Callee or proxy server as the refresher.
As a Callee, select UAC to use caller or proxy server as the refresher, or UAS
to use the phone as the refresher.
Select "Yes" to use INVITE method to refresh the session timer.
Default HTTP. Firmware upgrading may take up to 10 minutes depends on
network environment. Do not interrupt the firmware upgrading process.
IP address or domain name of firmware server.
Default blank. If it is configured, HT486 rev. 2.0 will request the firmware file
with the prefix. Useful for ITSPs. End user should keep it blank.
Default is blank. End user should keep it blank.
End user should keep it blank.
Default NO. End user should use default setting.
If this parameter is set to "Yes", the configuration update via keypad is
disabled.
If set to Yes, these four fields: SIP User ID, Authenticate ID, Authenticate
Password and Name will be included in Basic Settings configuration page.
Grandstream Networks, Inc
29
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents