Advanced User Configuration - Grandstream Networks HandyTone-286 User Manual

HandyTone -286 User Manual
End User
Password
IP Address
Time Zone
Daylight Savings
Time
6.2.3

Advanced User Configuration

To login to the Advanced User Configuration page, follow the instruction in section 6.2.1 to get to the
following login page. The password is case sensitive with a maximum length of 25 characters and the
factory default password for Advanced User is "admin".
Admin Password:
SIP Server:
Outbound Proxy:
SIP User ID:
This contains the password to access the Web Configuration Menu. This field is
case sensitive with max. 25 characters
There are 2 modes under which the IP phone can operate:
- If DHCP mode is enabled, then all the field for the Static IP mode are not
used (even though they are still saved in the Flash memory) and the IP phone
will acquire its IP address from the DHCP server in the network.
To use PPPoE feature please set the PPPoE account settings if the HT-286 is
connected directly to a DSL modem. The HT-286 will attempt to establish a
PPPoE session if any of the PPPoE fields is set.
- If Static IP mode is selected, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (mandatory), DNS Server 2 (optional) fields
will need to be configured.
This parameter controls how date/time is displayed according to the specified
time zone.
This parameter controls whether the displayed time will be daylight savings
time or not. If set to "Yes", then the displayed time will be 1 hour ahead of
normal time.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
sip.mycompany.com
any)
12345678
Grandstream Networks, Inc
(purposely not displayed for security protection)
(e.g., sip.mycompany.com, or IP address)
(e.g., proxy.myprovider.com, or IP address, if
(the user part of an SIP address)
19
.