Grandstream Networks HandyTone-286 User Manual page 17

Grandstream networks user manual analog telephone adaptor handytone-286
Hide thumbs Also See for HandyTone-286:
Table of Contents

Advertisement

HandyTone -286 User Manual
NAT Mapped Port: 60946
Total Inbound Calls: 0
Total Outbound Calls: 0
Total Missed Calls: 0
Total Call Time (in
minutes):
Total SIP Message
Total SIP Message
Received:
Total RTP Packet Sent: 0
Total RTP Packet
Received:
Total RTP Packet Loss: 0
MAC Address
IP Address
Product Model
Software Version
System Uptime
Registered
PPPoE Link Up
NAT
NAT Mapped IP
0
2
Sent:
2
0
All Rights Reserved Grandstream Networks, Inc. 2005
The device ID, in HEX format.
troubleshooting.
IP address assigned on the device.
This field contains the product model info.
Program: This should be consistent with the firmware version.
Bootloader: version number for bootloader, it could be lower than program
version.
HTML: This should be consistent with the firmware version.
VOC: This is the codec program, normally not changed.
This shows system up time since last reboot.
This shows whether the unit is registered to voip service provider's server.
This shows whether the PPPoE is up if connected to DSL modem
This shows what kind of NAT the HandyTone-286 is behind.
WAN side mapped IP if HandyTone-286 is connected to a NAT router.
Grandstream Networks, Inc
This is very important ID for ISP
17
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents