Basic Operations; Understanding Ht502 Voice Prompt; Table 5: Ht502 Ivr Menu Definitions - Grandstream Networks DUAL FXS PORT HT502 User Manual

UNDERSTANDING HT502 VOICE PROMPT

HT502 has a built-in voice prompt menu for simple device configuration. The IVR menu and the LED button
work with any of the FXS port. Pick up the handset and dial "***" to use the IVR menu.
Menu Voice Prompt
"Enter a Menu Option"
Main Menu
"DHCP Mode",
01
"Static IP Mode"
"IP Address " + IP address
02
"Subnet " + IP address
03
"Gateway " + IP address
04
"DNS Server " + IP address
05
07 Preferred Vocoder
"MAC Address"
10
12 WAN Port Web Access
13 Firmware Server IP
Address
14 Configuration Server IP
Address
FIRMWARE VERSION 1.0.6.8

BASIC OPERATIONS

TABLE 5: HT502 IVR MENU DEFINITIONS

Options
Press "*" for the next menu option
Press "#" to return to the main menu
Enter 01-05, 07,10, 12-17,47 or 99 menu options
Press "9" to toggle the selection
If using "Static IP Mode", configure the IP address information using
menus 02 to 05.
If using "Dynamic IP Mode", all IP address information comes from
the DHCP server automatically after reboot.
The current WAN IP address is announced
If using "Static IP Mode", enter 12 digit new IP address. You need to
reset the HT to take affect the new IP address.
Same as menu 02
Same as menu 02
Same as menu 02
Press "9" to move to the next selection in the list:

PCM U / PCM A

iLBC

G-726

G-723

G-729
Announces the Mac address of the unit.
Press "9" to toggle between enable / disable
Announces current Firmware Server IP address. Enter 12 digit new
IP address.
Announces current Config Server Path IP address. Enter 12 digit
new IP address.
HT502 USER MANUAL Page 15 of 50