Basic Operations; Get Familiar With Key Pad And Voice Prompt - Grandstream Networks HandyTone-486 User Manual

HandyTone-486 User Manual
5.1

Get Familiar with Key Pad and Voice Prompt

HandyTone-486 stores a voice prompt menu (Interactive Voice Response or IVR) for quick browsing
and simple configuration. To enter this voice prompt menu, simply press the button on the
HandyTone-486 or pick up the phone and dial "***". The following table shows how to use the voice
prompt menu to configure the device.
Menu Voice Prompt
Main Menu "Enter a Menu Option"
01 "DHCP Mode", or
"Static IP Mode"
02 "IP Address " + IP address
03 "Subnet " + IP address
04 "Gateway " + IP address
05 "DNS Server " + IP address
06 "TFTP Server " + IP address
47 "Direct IP Calling"
86 "Voice Messages Pending"
"No Voice Messages"
99 "RESET"
"Invalid Entry"
NOTES:

Basic Operations

5
9
User's Options
Enter "*" for the next menu option
Enter "#" to return to the main menu
Enter 01 – 06, 47, 86 or 99 Menu option
Enter '9' to toggle the selection
If user selects "Static IP Mode", user need
configure all the IP address information
through menu 02 to 05. If user selects
"Dynamic IP Mode", the device will retrieve
all IP address information from DHCP server
automatically when user reboots the device.
The current WAN IP address is announced
Enter 12-digit new IP address if in Static IP
Mode.
Same as Menu option 02
Same as Menu option 02
Same as Menu option 02
Same as Menu option 02
When entered, user will be prompted a dial
tone, dial a 12-digit IP address to make a direct
IP call.
(For details, see "4.2.2 Make a Direct IP
Call".)
If there are voice messages, user can dial "9"
and dial pre-configured phone number to
retrieve voice message.
Enter "9" to reboot the device; or
Enter MAC address to restore factory default
setting (For details, see section 8.)
Automatically returns to Main Menu
Grandstream Networks, Inc.