Firmware And Configuration File Prefix And Postfix; Managing Firmware And Configuration File Download; Firmware Version 1.0.6.8 - Grandstream Networks DUAL FXS PORT HT502 User Manual

Dual fxs port analog telephone adaptor

Hide thumbs Also See for DUAL FXS PORT HT502:

Table of Contents

numbers. i.e., P2 is associated with "Admin Password" in the ADVANCED SETTINGS page. For a

detailed parameter list, please refer to the corresponding firmware release configuration template.

When Grandstream Device boots up or reboots, it will issue request for configuration file named

"cfgxxxxxxxxxxxx", where "xxxxxxxxxxxx" is the LAN MAC address of the device, i.e., "cfg000b820102ab".

The configuration file name should be in lower cases.

FIRMWARE AND CONFIGURATION FILE PREFIX AND POSTFIX

Firmware Prefix and Postfix allows device to download the firmware name with the matching Prefix and

Postfix. This makes it the possible to store ALL of the firmware with different version in one single directory.

Similarly, Config File Prefix and Postfix allows device to download the configuration file with the matching

Prefix and Postfix. Thus multiple configuration files for the same device can be stored in one directory.

In addition, when the field "Check New Firmware only when F/W pre/suffix changes" is set to "Yes", the

device will only issue firmware upgrade request if there are changes in the firmware Prefix or Postfix.

When "Automatic Upgrade" is set "Yes, every" the auto check will be done in the minute specified in this

field. If set to "daily at hour (0-23)", Service Provider can use P193 (Auto Check Interval) to have the

devices do a daily check at the hour set in this field with either Firmware Server or Config Server. If set to

"weekly on day (0-6)" the auto check will be done in the day specified in this field. This allows the device

periodically check if there are any new changes need to be taken on a scheduled time. By defining different

intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File

download in minutes to reduce the Firmware or Provisioning Server load at any given time.

Automatic Upgrade:

Yes, every

Yes, daily at hour

10080

minutes(60-5256000).

(0-23).

Yes, weekly on day

HT502 USER MANUAL

(0-6).

Page 48 of 50

Table of Contents