Important Settings; Nat Settings - Grandstream Networks DUAL FXS PORT HT502 User Manual

Dual fxs port analog telephone adaptor
Hide thumbs Also See for DUAL FXS PORT HT502:
Table of Contents

Advertisement

Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There
are two default passwords for the login page:
User Level:
End User Level
Administrator Level
The password is case sensitive with maximum length of 25 characters. The factory default password for
End User and administrator is "123" and "admin" respectively. Only an administrator can access the
"ADVANCED SETTING", "FXS PORTs" configuration pages. Please reference the GUI pages using the
following link:
http://www.grandstream.com/products/ht_series/ht502/documents/ht502_gui.zip
NOTE: If you cannot log into the configuration page by using the default password, please check with the
VoIP service provider. It is most likely the VoIP service provider has provisioned the device and configured
for you therefore the password has already been changed.

IMPORTANT SETTINGS

The end-user must configure the following settings according to the local environment.
settings on the web configuration pages are set to the default values.

NAT SETTINGS

If you plan to keep the gateway within a private network behind a firewall, we recommend using STUN
Server. The following three (3) settings are useful in the STUN Server scenario:
1. STUN Server (under Advanced Settings webpage)
Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the
internet and enter it on this field. If using Public IP, keep this field blank.
2. Use Random Ports (under Advanced Settings webpage)
This setting depends on your network settings. Generally if you have multiple IP devices under the
same network, it should be set to Yes. If using a Public IP address, set this parameter to No.
3. NAT Traversal (under the Profile web pages)
FIRMWARE VERSION 1.0.6.8
Password:
Web pages allowed:
123
Only Status and Basic Settings
admin
Browse all pages
HT502 USER MANUAL
.
NOTE: Most
Page 25 of 50

Advertisement

Table of Contents
loading

Table of Contents