Grandstream Networks DUAL FXS PORT HT502 User Manual page 34

Authenticate Conf File If set to Yes, config file is authenticated before acceptance.
Firmware Key
SSL Certificate
SSL Private Key
SSL Private Key
Password
ACS URL
ACS Username
ACS Password
Periodic Inform
Enable
Periodic Inform
Interval
Connection Request
Username
Connection Request
Password
System Ring Cadence
FIRMWARE VERSION 1.0.6.8
configuration from an unauthorized change.
Used for firmware encryption. Should be 32 digit in hexadecimal representation. End
user should keep it blank.
The user specify SSL certificate used for SIP over TLS in X.509 format.
The user specify SSL private key used for SIP over TLS in X.509 format.
User specify password to protect the private key above.
User specify the Auto Configuration Server's URL (TR-069 protocol)
User specify the ACS Username
User specify the ACS password
Default is No. If set to YES, device will send inform packets to the ACS
Frequency that the inform packets will be sent out to the ACS
Set a user name for the ACS to connect to this device
Set a password for the ACS to connect to this device
Configuration option is set ring cadence on all FXS ports for all incoming calls. (Syntax:
c=on1/off1-on2/off2-on3/off3(only 3 cadences maximum)) Default is set to c=2000/4000;
(US standards)
HT502 USER MANUAL
This protects the
Page 34 of 50