Grandstream Networks DUAL FXS PORT HT502 User Manual page 41

Subscribe for MWI
Send Anonymous
Anonymous Call
Rejection
Special Feature
FIRMWARE VERSION 1.0.6.8

[147] - any digit 1, 4, or 7;

<2=011> - replace digit 2 with 011 when dialing

< =1> - add a leading 1 to all numbers dialed, vice versa will
remove a 1 from the number dialed

| - or
• Example 1: {[369]11 | 1617xxxxxxx} – Allow 311, 611, 911, and any 11 digit
numbers with leading digits 1617
Example 2: {^1900x+ | <=1617>xxxxxxx} – Block any number of leading digits
1900 and add prefix 1617 for any dialed 7 digit numbers
• Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} –Allow any combinations of numbers
with 11 digits which has a leading digit 1, but 5th digit cannot be 0 or 1. Or any length
of numbers with a minimum of 2 digits beginning with 2, with the leading digit
replaced with 011.
3. Default: Outgoing - {x+}
Example of a simple dial plan used in a Home/Office in the US:
{ ^1900x. | <=1617>[2-9]xxxxxx | 1[2-9]xx[2-9]xxxxxx | 011[2-9]x. | [3469]11 }
Explanation of example rule (reading from left to right):
•
^1900x. - prevents dialing any number started with 1900
•
<=1617>[2-9]xxxxxx - allows dialing to local area code (617) numbers by dialing
7 numbers and 1617 area code will be added automatically
•
1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11 digits
length
•
011[2-9]x. - allows international calls starting with 011
•
[3469]11 - allow dialing special and emergency numbers 311, 411, 611 and 911
Note: In some cases user wishes to dial strings such as *123 to activate voice mail or
other application provided by service provider. In this case * should be predefined
inside dial plan feature and the Dial Plan should be:
Default is No. When set to "Yes" a SUBSCRIBE for Message Waiting Indication will be
sent periodically.
If this parameter is set to "Yes", the "From" header along with Privacy and P_
Asserted_Identity headers in outgoing INVITE message will be set to anonymous,
blocking Caller ID.
Default is No. If set to Yes, incoming calls with anonymous Caller ID will be rejected
with 486 Busy message.
Default is Standard. Choose the selection to meet some special requirements from
Softswitch vendors.
HT502 USER MANUAL
{ *x+ }.
Page 41 of 50