Configure Motion Detection & Alarm Actions - Grandstream Networks GXV3662 User Manual

Show Motion Detection Regions – If
this option is selected, the motion
detection regions will be displayed on
the screen with a white border.
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the
white border will flash red
motion detection alarm is triggered.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
Configure Motion Detection & Alarm Actions
An alarm action is what the GXV3662 is going to do when an alarm is triggered during the
defined time period – the time
schedule. The GXV3662 allows
multiple alarm actions.
Firmware 1.0.1.22
Grandstream Networks, Inc. 03/2011
when a
GXV3662 IP Camera
Button to save sensitivity only
Page 30 of 36