Connect To The Camera Using A Static Ip - Grandstream Networks GXV3662 User Manual

Connect to the Camera Using a Static IP.

If the camera does not get a response from the DHCP server after 3 minutes, it can be
accessed by the default IP 192.168.1.168.
1. Connect your PC to the same network as the GXV3662.
2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure
the subnet mask to 255.255.255.0.
3. Make sure that the device is turned on and connected to the network.
4. Start Internet Explorer on your computer.
5. Enter 192.168.1.168 in the address bar of the browser.
6. Enter the administrator user name and password to access the Web Configuration
Interface
7. The default user name and password are both set to admin.
8. IE will indicate that ―This website wants to install the following add-on:
‗GSViewerX.cab' from ‗Grandstream Networks Inc'.‖ Install this add-on by following
the instructions in IE.
9. You will see the home page.
Firmware 1.0.1.22
Grandstream Networks, Inc. 03/2011
GXV3662 IP Camera
Page 14 of 36